Geoff's Spool Holder

Electronics Project
Made ByGeoff Desborough
Time Required2 hour(s)
IngredientsPLA filament
Equipment RequiredUltimaker 2

This was created because the Imagin Plastics' reel is incompatible with the Ultimaker spool holder.

~24g PLA filament

Basic preparatory instructions go here.

  • download the stl
  • create your settings in Cura
  • print
No images found.
  • cyclopedia/objects/ultimakerspoolholder.txt
  • Last modified: 2019/11/18 15:27
  • by Daniel Harmsworth